A MESSAGE FROM ULA ABOUT SUNDAY’S FAILED LAUNCH: Vulcan Leo 1 updates.
Immediately following our launch anomaly during the mission carrying Amazon’s Leo spacecraft on Sunday, Nov. 15, the team began its investigation and review of the data. The FAA will oversee the ULA-led investigation, be involved in every step of the process, and approve ULA’s final report, including any corrective actions. It is very early in the process, and we want to focus on the data and avoid speculation until the investigation is complete.
While we appear to have lost telemetry and the mission at approximately 10 minutes into flight, early indications are that just after liftoff the launch vehicle experienced low booster performance, resulting in stage separation occurring when the vehicle was low in altitude and below minimal velocity to reach orbit.
The Vulcan second stage appears to have started nominally, and the RL10 engines were operating as planned. The second stage was performing well but was unable to recover from the performance loss resulting in loss of mission.
All indications are that the solid rocket booster performance was nominal, following nozzle improvements implemented for this launch.
TL;DR?
Blue Origin may not have worked all the kinks out of its BE-4 engines — but only maybe, according to this item: “However, according to preliminary data, two independent sources indicated to Ars that the problem is currently believed to have originated on the launch vehicle side rather than in the engines themselves. The issue may be related to systems that feed methane and liquid oxygen propellant to the engines.”